Turnigy Type D Light Wood propeller 14x8

Turnigy Type D Light Wood propeller 14x8

*Suitable for both Electric & Gas powered engines.

Turnigy HV SBEC 5A Switch Regulator (8-42V input)

The Turnigy HV SBEC 5A Switch Regulator is perfect for large electric models using high voltage power setups. With its high voltage (8-42V) input capability, you will have the option to run this unit off of your main battery or off a separate 2-10S lipo.

This voltage regulator will provide a sustained 4A output at 5V or 6V, and has a max current capability of 5A.

Give your RX and servos the power they need with this high quality HV SBEC by Turnigy.

Input Voltage: 8-42V (2-10S Lipo)
Output Voltage: 5V or 6V (user selectable)
Max Load: 4A continuous/5A max
Weight: 21g
Dimensions: 59x10x25mm

15CM Servo Lead Extention (Futaba) 26AWG (10pcs/set)

15CM Servo Lead Extention (Futaba) 26AWG (10pcs/set)
Quality high-strand silicon wire used with soldered and crimped plugs.
A high-quality secure servo connection, everytime!

NTM Prop Drive 50 Series Accessory Pack

Standard accessory pack for NTM Prop Drive 50 series motors.
CNC Machined (take a close look at the cross mount, even that is machined rather than punched) from billet 6061 alloy for strength and balance.
Produced in-house by hexTronik to reduce costs and deliver better value to you!

Shaft Diameter: 8mm
Shaft Length: 36mm
Cross Plate Bolt Holes: 62mm
Weight: 55.1g (Total)

NTM Prop Drive 50-50 580KV / 2000W

NTM Prop Drive motors are rock-solid performance outrunners with tight windings, quality bearings, correctly rated magnets, balanced stator and flux rings plus they are QC checked at 14 points, from material processing all the way through to final dyno test.

Because we design and build these motors completely in-house (from 3D/2D drawing to materials sourcing, machining, balancing, final assembly and dyno) we can completely control production and ensure product consistency from design right through to shipping the product to you. The removal of middle-men has meant we can drive better value to the market and retail these motors at factory(our) prices! All performance figures are real and tested on our own motor dynos.

Our QC engineers check and balance each motor before shipping to the HobbyKing.com warehouse.

Model: NTM Prop Drive Series 50-50 580kv
Kv: 580rpm/v
Max current: 90A
Max Power: 2000W @ 22.2v (6S)
Shaft: 8mm
Weight: 347g
ESC: 100A
Cell count: 4s~6s Lipoly
Front Mounting Hole Distance: 30mm
Connection: 4mm Bullet-connector

Prop Test Data:
14x8 - 14.8V / 587W / 40.3A / 2.9kg thrust
14x8 - 18.5V / 1077W / 60.7A / 4.03kg thrust
14x8 - 22.2V / 1906W / 88.2A / 5.36kg thrust
15x8 - 14.8V / 626W / 43.6A / 3.3kg thrust
15x8 - 18.5V / 1165W / 64.2A / 4.85kg thrust
15x8 - 22.2V / 1961W / 88.8A / 6.15kg thrust