FatShark 2.4Ghz Telemetry System (Incl. Tx/Rx)




A plug and play 2.4Ghz 100mW FPV system.
Great for people with mHz radio systems who dont plan to fly 2km high!
Fatshark goggles are known for their easy set-up and great clarity as well as wide viewing angle. Combined with a reliable low power consumption, light weight 2.4Ghz Tx and you have a simple, reliable no fuss FPV system that will have you flying in no time.
Standard antenna will give you 400-500mtrs range.

Included.
FatShark FPV Goggles w/ inbuilt Rx.
FatShark (Airwave) Small footprint Tx 100mW 2.4Ghz (25x45mm)
Charger
LiPo Battery
Cables
Spare Foam

2.4Ghz or 5.8Ghz, which is best for you?
If you fly with a Mhz radio such as 72, 36 or 35mhz then you should choose a 2.4Ghz FPV system as it will give you more range for the same power. Many hard-core FPV pilots fly with Mhz radios because of its superior range to 2.4Ghz radio control systems.
If you have a Spektrum, Futaba or other 2.4Ghz radio, then you need to fly with a 5.8Ghz system.

900MHZ 1500mW Tx/Rx & 1/3-inch CCD Camera NTSC 520TVL




12 Channel 900Mhz Tx/Rx video system with CCD camera.
A powerful 1.5W (1500mW) powered Tx!
Unlike other generic systems, we have produced a wiring loom and included it with the camera so that the Tx and camera will be compatible and on the same voltage.
If you buy your camera and Tx seperately the plug polarity and voltages may be very different.

Included.
1 x SONY CCD 1/3inch Camera
1 x 900Mhz 8 channel Video Transmitter (1500mW)
1 x 900Mhz 12 channel Video Receiver


Camera spec.
Image device: 1/3-inch Sony super HAD color CCD
Pixel: 752 x 582(NTSC)
Synchronization: Internal synchronization
Horizontal resolution: 520TV Lines
Minimum Illumination: 0.1Lux/F1.2
S/N Ratio: Greater than 48dB(AGC OFF/B/W OFF)
White balance: Auto Tracking White Balance
Auto backlight compensation: On/OFF switchable
Lens: 3.6-6mm
Input voltage: DC12V
Electric current: 80MA±5MA
Electronic Shutter: Auto
PAL: 1/50 to 1/100,000 seconds
Video output: 1.0Vp~p75Ω
Operation Temp.: -10~+50
Size: 38 x 38mm
Power supply: 12V/150mA
FPV Tx Spec.
Channel: 8-Ch, AV synchronization
Power: 1500mW
Input voltage: 12V
Weight: 18g
Size: 73x41x14mm
Frequency: 0.9G 0.910G,0.980G,1.010G,1.040G

True 640x480 8ch 2.4/5.8Ghz Dual Rx w/ HeadTrack Video Goggles








Add a totally new dimention to your R/C car, plane or heli! These video goggles give you a high resolution display. Its just like you were flying the plane/heli yourself!
And because these goggles are 5.8Ghz ready, they wont interfere with your current 2.4Ghz system!

These 640x480 resolution 2.4/5.8Ghz Dual Receiver 8ch video goggles come with a true full colour micro LCD panel and a silicon rubber shield for blocking sunlight, giving the user a rich 80 inch virtual screen display perfect for high-end FPV flight.
A compact and light-weight design, Adjustable volume, Brightness and Contrast plus they can be powered by the Tx and include full anti-drift head-tracking via your transmitter!
Powered by your TX or an 8~13V input these goggles are equipped with the dual Audio/Video receiver module, just use the appropriate antenna provided with the kit and set the frequency from 2.4 to 5.8Ghz in the OSD (On Screen Display) menu and you will be ready to receive the video from your FPV transmitter.
These goggles are perfect for a screen overlay Data Expander (like eagletree) due to its large 640x480 size high resolution screen.

Spec.
Display resolution: VGA 640x480 RGB, 922k pixels
Field of view: 32 degree
Virtual image size: 80 inches
Frequency: 2.4GHz / 5.8GHz (selectable)
Audio & Video: input/output
Input voltage: 8~13V

Channels
2.4G :
2414,2432,2450,2468,2370,2390,2490,2510MHZ
5.8G : 5705,5865,5665,5645,5885,5905,5925,5945MHZ

Included.
1 x 640x480 8ch 2.4/5.8Ghz True Color Video Goggles
1 x Data cable (External Power & Headtracking)
1 x Power Cable for Lipo battery
1 x Antenna for 2.4GHz
1 x Antenna for 5.8GHz

PC Flight Simulator Controller System








PC Flight Simulator Controller System can easily connect to any PC using Windows XP, Vista OS.
Included is the USB connector, FPV system 1.5 for FPV gyro or the trainer port of your radio. Joystick can be connected to your radios trainer port for controlling up to 4 channels. Also works in conjunction with the X-Gyro head tracker for realistic FPV flight.

Features:
Ergonomic, ambidextrous stick with trigger and five buttons-all positioned for instant access in the heat of a battle.
POV switch-easily change cockpit views to keep track of your enemies.
Pinkie switch operates as a normal control or can be programmed as a Shift Button to double up your control functions.
Trottle lever for smooth, realistic engine control
Twist action rudder control
Unique removable legs for easy storage
Supported by Saiteks powerful SST programming software


Spec.
Power consumption max: 250mW
Power supply: 5V DC

BT-1 8-Channel FPV Joystick








For all of you FPV pilots out there, this is the one you have been waiting for!

The BT-1 8-Channel FPV Joystick is capable of interfacing with your transmitter (via trainer port) with the included FPV control box, and allows you to control up to 8 channels independently. There are 3 proportional channels, and 5 on/off channels. The BT-1 offers you the ease of flying your FPV model with just one hand.


Features:
Ergonomic design
Throttle lever for smooth, easy throttle control
Easily accessible trigger and function buttons

RC805 - 5.8G 8 Channel AV Receiver





5.8Ghz Receiver only

The RC805 5.8Ghz AV Receiver features a digital channel display and jumperless, one press channel selection. This receiver also includes an additional AV output for video recording while using FPV goggles.

Specs.
Receiving sensitivity: < -90dBm
Receiving frequency: ISM 5.8GHz 8CH
Antenna port: 50ohm SMA
Antenna: Gain: 2dBi
Power supply: DC12V 220mA
Video output level: 1Vp-p @ 75ohm
Audio output level: 1Vp-p @ 10Kohm
Dimensions: 72.5x54.2x15.5mm
Weight: 52g (w/antenna)

Channels
5.8G : 5705,5865,5665,5645,5885,5905,5925,5945MHZ

5.8G 500mW 8 Channel AV Transmitter FPV





This 5.8G 500mW 8 Channel AV Transmitter features a high power output for longer range with your FPV models. With its audio/video inputs and video output, this is a great unit for use with your FPV/OSD system. It also offers a compact size with built in heatsink and cooling fan to ensure your components stay cool.

Features:
5.8G Technology 5645MHz~5945MHz
Built-in microphone audio pick up device
8 Channel selectable

Specs:
Video Format: NTSC/PAL
Output Impedance: 50 Ohm
Output Power: 26~28 dBm
Operating Voltage: DC 7~15V
Supply Current: 500mA
Operating Temperature: -10~+85 °C
Audio Carrier Frequency: 6.5MHz
Video Input Level: 0.8~1.2 Vp-p
Video Input Impedance: 75 Ohm
Audio Input Level: 0.5~2.0 Vp-p
Audio Input Impedance: 10K Ohm
Antenna Connector: SMA Connector
Dimensions: 69 x 26 x 28mm
Weight: 66g (w/antenna)

5800MHz 500mW TS352 Wireless Video Audio AV Sender Channels & Frequencies

5.8G : 5705,5865,5665,5645,5885,5905,5925,5945MHZ

Compabible with the True 640x480 2.4ghz and 5.8ghz FPV goggles and the RC305 and RC805 5.8Ghz receivers.

Included:
1 x 5.8G 500mW transmitter
1 x Stock dipole whip antenna

FPV Tilt Camera Mount with Landing Gear







The HobbyKing FPV tilt camera mounting system is a simple and easy way to mount your camera. Suitable for 450~500 class helicopters and made from light weight fibre glass material. The mounting plate features adjustable screw locations for mounting your heli and for relocating the camera mount to attain correct CoG. Kit includes screws, ball sockets, connection rods, linkages and pre-cut fiberglass board.
Spec:
Height: 185mm (to mounting plate)
Skid width: 190mm
Skid length: 290mm
Camera mount area width: 110mm
Camera mount area height: 100mm
Dry Weight: 188g (not including servo)
Material: Fibre Glass

Required:
1 x 9g Servo

FPV Fiberglass Pan-Tilt Camera Mount L-Size




Specifically designed for our range of board cameras.
Light weight and easy to install. Our HobbyKing FPV mount system is a great way to mount your FPV board camera.
Special included bearings make pan and tilt smooth and bind free.
Kit includes bearings, screws, ball/socket, threaded rod and pre-cut fiberglass board. Specifically designed for our 1/3 inch sony CCD video camera.
Spec.
Dimensions: 42x40mm
Weight: 10g
Servo type required: 5~10g

FatShark Pan/Tilt CAM system, pre-assembled




FatShark Pan/Tilt cam.
Includes two servos and connects directly to your FatShark transmitter.
Includes stereo micraphone.
Cam: PAL 420TVL