Turnigy Talon Carbon Fiber Quadcopter Frame

If your looking for a high end, no compromise quadcopter frame with looks that could kill, the Talon is for you!

The Turnigy Talon quadcopter frame is a high quality carbon fiber frame that offers both great looks and performance. Built from light weight yet extremely rigid carbon fiber and aluminum alloy, the Talon offers a great combination of weight savings and strength.

The Talon features a beautifully finished carbon fiber main frame and arms, all connected together with aluminum alloy parts. This frame really gives your quad a high-tech and quality look.

We also offer a full line of quad electronics such as quadcopter control board, ESC, motors and more, so it has never been easier or more affordable to get a quad in the air!

All necessary hardware is included.

Weight: 240g
Width: 498mm
Motor Bolt Holes: 22~32mm

HobbyKing Multi-Rotor Control Board V3.0 (Atmega328 PA)

Based on the popular and already well supported KK Control board, the Hobbyking Multi-Rotor control board is bringing Multi-Rotor madness to the masses with its breakthroughs in quality and price!

The HobbyKing Multi-Rotor control board uses Japanese Murata piezo gyros that are less sensitive to vibration than SMD type gyros and also features state of the art SMT manufacturing to ensure quality. This board also uses a user programmable Atmega328PA IC.

Size: 50.5mm x 50.5mm x 23.5mm
Weight: 14.5 gram
IC: Atmega328 PA
Gyro: Murata Piezo
Input Voltage: 3.3-5.5V
Signal from Receiver: 1520us (4 channels)
Signal to ESC: 1520us

Whats is a Multi-Rotor Control board you ask?

The HobbyKing Multi-Rotor controller is a flight control board for multi-rotor Aircraft (Tricopters, Quadcopters, Hexcopters). Its purpose is to stabilise the aircraft during flight. To do this it takes the signal from the three on board gyros (roll, pitch and yaw) then passes the signal to the Atmega328PA IC. The Atmega328PA IC unit then processes these signals according the users installed software and passes control signals to the installed Electronic Speed Controllers (ESCs). These signals instruct the ESCs to make fine adjustments to the motors rotational speed which in turn stabilises your multi-rotor craft.

The HobbyKing Multi-Rotor control board also uses signals from your radio systems receiver (Rx) and passes these signals to the Atmega328PA IC via the ail, ele, thr and rud inputs. Once this information has been processed the IC will send varying signals to the ESCs which in turn adjust the rotational speed of each motor to induce controlled flight (up, down, backwards, forwards, left, right, yaw).

Note: A user manual is available under the files tab.
*Royalties paid on each unit sold to Rolf, the original KK Designer.

Hobby King 20A ESC 3A UBEC

Constant Current: 20A
Burst Current: 25A
Battery: 2-4S Lipoly / 5-12s NiXX
BEC: 5v / 3A
Motor Type: Sensorless Brushless
Size: 54 x 26 11mm
Weight: 30g

Programming Functions:
Battery Type: Lipo /NiXX
Brake: On / Off
Voltage Protection: Low / Mid / High
Protection mode: Reduce power / Cut off power
Timing: Auto / High / Low
Startup: Fast / Normal / Soft
PWM Frequency: 8k / 16k
Helicopter mode: Off / 5sec / 15sec (Start up delay)

User manual can be downloaded from the files Tab.

NX-4005-650kv Brushless Quadcopter Motor

If youre serious about your quad-copters performance, then look no further than the AX-4005. Built with high-end 45SH magnets, a high pole count and custom motor mount, this quad-motor is designed purely for multi-rotor applications.

The AX-4005 includes a built in prop saver for GWS style props and a built in aluminum mount for quick and easy installation on your quadcopter frame.

This is not a modfied aeroplane outrunner. It was designed from the ground up for quad copters.

Kv: 650rpm/v
Turns: 24T
Resistance: 0.147Rm
Idle Current: 0.6A
Can size: 45mm
Can Length: 10mm
Shaft: 3mm (Includes Prop saver mount for GWS style props)
Suggested ESC Amps: 20A
Rated Watts: 130W
Weight: 59g
Cell count: 3~4S Lipoly

Prop adapter suit 5mm propeller

HobbyKing 12A BlueSeries Brushless Speed Controller

Built with imported N-Channel mosFETs and an ultra fast Atmel MCU & heartbeat make this a high performance ESC with excellent sync capabilities.
Programmable via an R/C controller.It allows you to program all functions to fit your specific needs, which makes it efficient and user friendly.
Extremely low internal resistance
Super smooth and accurate throttle linearity
Over heat and over-load protection
Auto shut down when signal is lost or radio interference becomes severe for more than 2 seconds
Supports high RPM motors
Power arming protection (prevents the motor from accidentally running when switched ON)
New Advanced programming software

Programming features:
Brake setting (we recommend using brake for only folding props applications)
Battery type(LiPo or NiCd/NiMh)
Low voltage cutoff setting
Factory default setup restore
Timing settings (to enhance ESC efficiency and smoothness)
Soft acceleration start ups (for delicate gearbox and helicopter applications)
Governor mode(for helicopter applications)
Motor rotation( clockwise\counterclockwise)
Switching frequency
Low voltage cutoff type (power reduction orirnmediate shutdown)
Factory default settings:
Brake: off
Battery type Detect: LiPo with Automatic Cell
Low voltage cutoff threshold: Medium (3.0V/65%)
Timing setup: Automatic
Soft Acceleration Start Up: Medium
Governor mode : OFF
Frequency : 8kHz
Low voltage cutoff type: Reduce power

Cont. Current: 12A
Burst Current: 16A/10sec
Battery: 2-4 Cell Lipo / 5-12 Cell Ni-XX
SBEC: 5V/ 1A Output
Size: 22*21*4mm
Weight: 10g

Turnigy 2730 Brushless Motor 1300kv

Dimension: 32mm x 27mm, 43mm(with shaft)
Weight: 28g (kv1300) (not including connectors)
Diameter of shaft: 3.1mm
Length of front shaft: 9.6mm
Lamination thickness: .2mm
Magnet type: 45SH

Max performance
Voltage: 2~3S
Max current: 3.5~7.5A/20S
Propeller: 7x3.5~9x4.7
Pull: 250~470g

USBasp AVR Programming Device for ATMEL proccessors

USBasp AVR Programming Device for ATMEL proccessors

1 x USBasp Device
1 x 10-10-6 Cable

Suits the HobbyKing Quadcopter Control Board.

See the User Guide under the files tab for instructions and software downloads.

Micro Spycam Helicopter w/1GB SD Card (Mode 1) (RTF)

Ever wished you had a helicopter with a camera on it to make your own aerial videos? Well your wish has come true with the new Micro Spycam RTF Helicopter!

This coaxial heli features full 3ch control (Forward, Backward, Left/Right), super stable flight characteristics, a built-in video camera, LED lights to illuminate dark areas/night flying, and comes in a ready to fly package including a 1GB memory card! Everything you need to record aerial video is included in the box. It even includes a micro SD USB card reader for your computer!

Simply charge the flight battery via included USB charge cord (or from transmitter charge cord), insert memory card into heli, take off and push the record button on transmitter to start the video! In addtion to remotely controlling the video function from transmitter, you can also snap still photos with the push of a button.

We have tested many different spycam helis on the market today and found this model to be the most user friendly and best value hands down. Super simple to use and very easy to fly, even a beginner can be capturing their own aerial video in no time with this heli.

-Full 3ch control (Forward, Backward, Left/Right)
-Super Stable Flight Characteristics
-Remotely Controlled Video Recording/Still Photos
-LED lights
-1GB Micro SD Card
-USB Card Reader
-USB Charge Cord
-Spare Main/Tail Blades

Weight: 50g
Dimensions: 235x195x200mm
Battery: Built-in Lipoly

Micro Spycam RTF Helicopter
Infrared Transmitter (Mode 1 -throttle on right)
1GB Micro SD Card
USB Micro SD Card Reader
USB Charge Cable
Spare Main Blade (1 upper/1 lower)
Spare Tail Blade x 2

6AA Batteries (for transmitter)

*Note - This listing is for Mode 1 transmitter version (throttle on right side)