Hobbyking BAE Hawk 90mm EDF Composite 1140mm (ARF) (AUS Warehouse)








Designed for the RAF to replace the Folland Gnat, the BAE Hawk has become one of the most succesful jet training aircraft ever built and is used by many Nations both as a trainer and as a combat aircraft. The Hawk is of course used by the world famous Red Arrows display team and it is undoubtedly one of the prettiest military jets ever built, especially in this fantastic display scheme!

This beautiful Hawk just oozes quality, the deep gloss finish and attention to scale detail is amazing, this level of finish is normally reserved for large scale turbine models and EDF models with a much, much higher price tag, even the scale pilots and cockpit are included. The one peice removable wing is retract ready and features flaps, the glassfibre ducting is well designed & all included, the hardware is also good quality, as you would expect for a model this well made. For the final touch, we have a set of purpose built electric retracts available, which feature sprung scale trailing link legs and alloy wheels, they are designed to fit straight in with no mods (NOT included, see related items below).

As well as truly amazing looks, this H-King Hawk is designed for performance, there is tons of canopy space for Lipolys, a high power 6s set up would be the minimum for jet like performance, 8s would take you into ballistic territory! The Hawk is such a stunning jet to fly, both fast and aerobatic, so we would reccomend High Torque Metal Gear mini servos all round. This high quality BAE Hawk is one of the best looking and performing 90mm EDF jets available anywhere, a genuine scale, high performance EDF at an affordable price, for jet fans, this Hawk is a must!

Specs:
Wingspan: 1140mm
Length: 1220mm
Flying Weight: 2600g~2800g
Wing Area: 24dm2
Wing Loading: 108g~116g/dm2

Requires:
6 Channel TX/RX
90mm EDF Unit
36mm EDF Motor (6s capable Min)
6~8 Mini High Torque MG Servos
80A~100A ESC
UBEC
Retracts
5000mAh 6s Lipoly Battery (Min)

* Does not include fixed landing gear, retracts required.
* Please set C of G to 105mm from the leading edge of the wing where it meets the fuselage for the maiden flight and adjust to suit.

Dassault Alpha Fighter 90mm Ducted Fan EPO (ARF)








Highly scaled, large size EPO ARF aerobatic fighter jet with a big 90mm EDF system. The Alpha EDF jet comes mostly pre-built and includes a 90mm EDF fan unit.

This well detailed and strikingly painted EPO foam jet uses a 90mm ducted fan unit to provide fast throttle response and a high top speed.

This ARF model has many special features, such as being retract ready, carbon reinforced wings and flaps for great slow-speed handling. The canopy uses a spring loaded latch system that ensures a secure fit, and is easily removable to change batteries.

This is an ARF model, so you will need to add your own electronics such as motor, ESC, servos, retract system and radio gear. The Alpha includes landing struts w/wheels that can be fit to which ever retract system you choose for this model. It will accept mechanical or electronic retracts with ease. It also includes all required hardware such as screws, control rods w/clevis and control horns.

This is an exciting looking big size EDF model that will impress everyone at your next club meeting!

Specification:

Wingspan: 1020mm
Length: 1380mm
Flying Weight: 2500g
Channel: 6ch
Motor: 1600~2000kv Brushless Inrunner (required)
ESC: 80~100A (required)
Servo: 8 x 9g (required)
EDF: 90mm

Required:
Your own 6ch Radio System
1600~2000kv Brushless Inrunner
80~100A ESC
8 x 9g Servo
Retract Units x 3 (electronic or mechanical retracts - will need 3 x mini servos for mechanical)
3500~4500mah 22.2V 6S Lipoly

Specter-1800 Composite Performance V-Tail EP Glider 1800mm (ARF) PRE-ORDER







The Specter 1800 is one of a devilishly good range of exclusive Hobbyking Performance gliders that offer you quality, looks and speed at a saintly good price.

The Specter has a nicely finished composite fuselage and expertly built and covered balsa wings and tailplane. As you would expect, the wing is removable for easy transportation & fast field assembly, also the Specter uses a V-tail configuration for excellent speed and handling. There is a comprehensive hardware kit supplied and for the final touch, the canopy is carbon fiber.

There is no doubt, the Specter 1800 has been designed for performance, with the right set up, this model offers excellent speed and the airframe offers superb handling, this is a nice quality ARF model that any RC Pilot would be proud to own, performance was never so affordable!

Features:
V-Tail configuration
Removable wing for easy transport
CF canopy and wing tube
Easy build with instructions included
Excellent quality
Composite fuselage
Excellent flight performance

Specs:
Wingspan: 1800mm
Length: 930mm
Airfoil: HN354
Flying Weight: 680g

Requires:
Your own 4 Channel TX/RX with v-tail mixing
28mm Brushless Inrunner Motor up to 1800kv
4 x 9g servo
1600~1800mAh 3s Lipoly Battery
30mm Folding prop spinner
40A ESC w/BEC

Pacer G007-H Composite High Performance Glider 2240mm (ARF)








Designed with performance in mind, the Pacer offers serious performance at a less than serious price!

The fuselage is composite while the wing and v-tail are balsa, all have an excellent finish. The ailerons and elevator/rudder are all "live" hinged, the canopy and wing tube are CF, the motor mount is glassfiber and the hardware excellent, dont let the price fool you, the Pacer is designed for speed! It is also practical and features 2pc plug in wings with an easy access bolt mount for security and a good size CF wing tube for rigidity and lightness.

Fitted with a 36mm~39mm brushless inrunner and a large diameter folding prop, the Pacer will have an amazing climb rate, once powered down, it is a blisteringly fast glider that is just so much fun to fly and will last for years to come due to its excellent finish. The Pacer is an attractive looking high performance glider that is a great size for a serious days flying in almost any weather, cheap to buy, cheap to build, looks great and performs, perfect!

Specs:
Wingspan: 2240mm
Wing Area: 36.85dm2
Length: 1086mm
Stab Area: 6.46dm2
Elevator/Rudder Area: 1.42dm2
Root Airfoil: 11.4% Symetrical
Flying Weight: 1700g~2000g

Requires:
Your Own 4 Channel TX/RX
2 x 12g MG High Torque servo + 2 x Low Profile Wing Servo (or 4 x 12g MG High Torque Servo)
4s 2200mAh Lipoly Battery
36mm~39mm Inrunner Brushless Motor
60A ESC w/BEC
40mm Folding Prop Spinner