HobbyKing Red Brick 125A ESC (Opto)





The HobbyKing Red Brick ESCs wont win first place for style, though they will take top points for simplicity and reliability. With a basic set of programming features these ESCs are a perfect solution for anyone looking for a basic yet robust speed controller.

The Red Brick ESCs have been engineered with heat dissipation in mind. featuring over sized Aluminium heat sinks the Red Brick ESCs are slightly larger than many ESCs in their class, however this compromise in size is aimed at assisting to eliminate the problems associated with over heating.

Specs.
Max Amps: 125A
Ubec: Nil
Cells: 2~7s Lipoly
Size: 83mm x 18mm 39mm
Weight: 85g (Inc Wires)

User manual included.

Turnigy Fatboy 300A ESC 5~15S - (OPTO)









Our largest ESC yet! the Turnigy Fatboy speed controller is rated at a massive 300 Amp continuous current draw and 380 Amp burst!

The Fatboy features a large Aluminum heat sink case, twin brushless cooling fans, dual 10AWG input wires, built in anti-spark protection and 8mm female bullet terminals for the motor output.

A programming box has also been included with the Turnigy Fatboy to make setup fast and easy. This ESC is suited to large scale 100cc plus Electric conversions.

Specs.
Voltage: 18.5V-55.5V (5s-15s Lipo)
Current: 300A (380A surge within 10 seconds)
BEC: No BEC (Opto)
Size: 19cm x 12cm x 4.9cm
Weight: 850g

Programming Features.
Auto detect Lipo cells
Fully Programmable LVC
Current limiting
Cutoff type
Brake type
Timing advance
Start up type
Governor mode.

WARNING
This ESC is suited to R/C model applications only. Do not attempt to use it to power Push Bikes, Mountain boards, go-karts or similar machines. The programming logic is only designed for R/C Plane and Heli use. No warranty will be offered for incorrect use of this item.

HobbyKing Red Brick 200A ESC (Opto)





The HobbyKing Red Brick ESCs wont win first place for style, though they will take top points for simplicity and reliability. With a basic set of programming features these ESCs are a perfect solution for anyone looking for a basic yet robust speed controller.

The Red Brick ESCs have been engineered with heat dissipation in mind. featuring over sized Aluminium heat sinks the Red Brick ESCs are slightly larger than many ESCs in their class, however this compromise in size is aimed at assisting to eliminate the problems associated with over heating.

Specs.
Max Amps: 200A
Ubec: Nil
Cells: 2~7s Lipoly
Size: 80mm x 23mm 39mm
Weight: 108g (Inc Wires)

User manual included.

Turnigy Monster-2000 200A 4-12S Brushless ESC




The Turnigy Monster-2000 is based on an all new powerful microprocessor.
The new CPU means ultra fast sync timing, crisper throttle response, extremely low resistance and high voltage overheat protection.

Features:
Microprocessor controlled
Extremely low resistance
200A continous(230A surge)
Up to 38cells NiMH/NiCad or 2-12 Lipo cells
High rate adjustable switching (PWM:12K Hz/18K Hz/24K Hz)
BEC: Nil
Programmable low voltage cutoff
Programmable cutoff types(soft cutoff/hard cutoff)
Programmable brake type(disable/soft brake/hard brake)
Time advance programmable (low/standard/high)
Programmable current limiting(very sensitive/standard/insensitive/disable)
Governor mode(low rpm governor/high rpm governor)
Programmable Constant Power startup type(very soft start/soft start/fast start)
Thermal Protection(100 centigrade)
Apply to most of inrunner and outrunner brushless motors.
No complex programming, auto adapt work mode.
Safe"power on" arming program ensures motor will not accidentally turn on.
Auto shut down when signal is lost or radio interference becomes severe for more than 3 seconds .After radio connection has been reestablished, moving the throttle to the lowest position can restart the motor.
The ESC is disabled when the voltage is over 51v at power-on.

Spec.
Cont. Current: 200A
Burst Current: 230A
Battery: 4-12 Cell Lipo / up to 38 Cell Ni-XX
BEC: Nil
Size: 125*60*38mm
Weight: 293g
WARNING
This is an R/C plane/heli only ESC. Do not attempt to use it to power car, buggy, skateboard, go-kart or similar machines. The programming logic is only designed for R/C Planes and Heli and will burn if applied to other devices.

Turnigy Brushless ESC 85A w/ 5A SBEC




Built with imported N-Channel mosFETs and an ultra fast Atmel MCU & heartbeat make this a high performance ESC with excellent sync capabilities. This ESC has a 5A SBEC for solid reliable servo power.
Programmable via an R/C controller.It allows you to program all functions to fit your specific needs, which makes it efficient and user friendly.
Features:
Extremely low internal resistance
Super smooth and accurate throttle linearity
Over heat and over-load protection
Auto shut down when signal is lost or radio interference becomes severe for more than 2 seconds
Supports high RPM motors
Power arming protection (prevents the motor from accidentally running when switched ON)
New Advanced programming software

Programming features:
Brake setting (we recommend using brake for only folding props applications)
Battery type(LiPo or NiCd/NiMh)
Low voltage cutoff setting
Factory default setup restore
Timing settings (to enhance ESC efficiency and smoothness)
Soft acceleration start ups (for delicate gearbox and helicopter applications)
Governor mode(for helicopter applications)
Motor rotation( clockwise\counterclockwise)
Switching frequency
Low voltage cutoff type (power reduction orirnmediate shutdown)
Factory default settings:
Brake: off
Battery type Detect: LiPo with Automatic Cell
Low voltage cutoff threshold: Medium (3.0V/65%)
Timing setup: Automatic
Soft Acceleration Start Up: Medium
Governor mode : OFF
Frequency : 8kHz
Low voltage cutoff type: Reduce power

Spec.
Cont. Current: 85A
Burst Current: 100A
Battery: 2-6 Cell Lipo / 5-18 Cell Ni-XX
SBEC: 5.5V/ 5A Output
Size: 52*34*20mm
Weight: 60g

HobbyKing Red Brick 100A ESC





The HobbyKing Red Brick ESCs wont win first place for style, though they will take top points for simplicity and reliability. With a basic set of programming features these ESCs are a perfect solution for anyone looking for a basic yet robust speed controller.

The Red Brick ESCs have been engineered with heat dissipation in mind. featuring over sized Aluminium heat sinks the Red Brick ESCs are slightly larger than many ESCs in their class, however this compromise in size is aimed at assisting to eliminate the problems associated with over heating.

Specs.
Max Amps: 100A
Ubec: 5v / 5A
Cells: 2~7s Lipoly
Size: 80mm x 20mm 39mm
Weight: 93g (Inc Wires)

User manual included.

Turnigy Super Brain 100A Brushless ESC




Ultra fast microprocessor controlled, extremely low resistance circuit and chip design, and aluminum heatsink for better thermal dissipation are just some of the features in the new TURNIGY Super Brain range of brushless speed controllers.
The Super Brain brushless esc is a high performance ESC capable of standard and competition use.
Full protection, including signal loss, over-temperature.
Programable by USB, PC or your Tx.
Compatible with all radio systems.
Features:
Supports the ‘Turnigy USB Linker’ to program the ESC by computer.
ESC Firmware upgradeable via the internet.
Integrated flight data logger, records data for the ENTIRE flight such as:
- Voltage
- Current
- Temperature
- Motor RPM
- Throttle travel


Programmable settings;

Startup (Default Standard/Soft/hard)
Low Voltage cutoff (Default 12.0/15.0/18.0/21.0/24.0/27.0/30.0/33.0/36.0V)
Current limiting (Default Standard/Very sensitive/Insensitivity/Disabled)
Brake (Default None/Soft/Hard)
PWM rate (8/12/16 KHz)
Timing (Default Auto/Low/Middle/High)
Cutoff type (Default Hard/Soft)
Governor mode (Default Auto/Low/High)
Spec.
Constant Current: 100A
Burst Current: 120A
Battery: 4-12S Lipoly
BEC: No (OPTO)
Motor Type: Brushless
Size: 69 x 52 x 24mm
Weight: 109g
Throttle range: 640us

**Programable with Turnigy programming Box and Turnigy USB Linker, see related items below.
We suggest customers to not program the esc with their Tx.

HobbyKing Red Brick 125A ESC





The HobbyKing Red Brick ESCs wont win first place for style, though they will take top points for simplicity and reliability. With a basic set of programming features these ESCs are a perfect solution for anyone looking for a basic yet robust speed controller.

The Red Brick ESCs have been engineered with heat dissipation in mind. featuring over sized Aluminium heat sinks the Red Brick ESCs are slightly larger than many ESCs in their class, however this compromise in size is aimed at assisting to eliminate the problems associated with over heating.

Specs.
Max Amps: 125A
Ubec: 5v / 5A
Cells: 2~7s Lipoly
Size: 82mm x 20mm 40mm
Weight: 100g (Inc Wires)

User manual included.

TURNIGY Plush 80A w/ UBEC Speed Controller




Plush 80A 26v Brushless Speed Controller
The Plush series ESC are a very good quality controller. They have a broad range of programming features and a smooth throttle response compared to other BESCs in the same price range.

Our TURNIGY speed controllers come with a 14 month warranty. We guarentee these are the best Brushless Speed Controllers you can purchase at this price.
These speed controllers are sold in western countries under various names at triple the price.
We are certain you will find these to be the best BESC available from Asia.


Cont Current: 80A
Burst Current: 90A
UBEC Mode: 3A/5v out
Voltage Range: 5.6v ~ 26v
Weight: 91g
Size: 88x31x14mm

User Programmable, both via controller and optional programming card. The programming card is an excellent item as it instantly tells the user the current settings and with a few simple clicks of the buttons, the user can change the settings and have graphical reassurance of those changes.
The programming card is an excellent Item and simple to use!

HobbyKing Red Brick 100A ESC (Opto)





The HobbyKing Red Brick ESCs wont win first place for style, though they will take top points for simplicity and reliability. With a basic set of programming features these ESCs are a perfect solution for anyone looking for a basic yet robust speed controller.

The Red Brick ESCs have been engineered with heat dissipation in mind. featuring over sized Aluminium heat sinks the Red Brick ESCs are slightly larger than many ESCs in their class, however this compromise in size is aimed at assisting to eliminate the problems associated with over heating.

Specs.
Max Amps: 100A
Ubec: Nil
Cells: 2~7s Lipoly
Size: 80mm x 18mm 39mm
Weight: 83g (Inc Wires)

User manual included.

Hobbyking SS Series 90-100A ESC




The Hobbyking SS series comes with a limited range of programming functions and are designed to be plug-n-play.
A perfect ESC for those looking for something simple to use and economic.

Spec.
Weight: 85g
Size: 70x50x13mm
Cells: 2-7S Li Po
Max Current: 90A [over 70A use 6S only]
Burst : 100A
No BEC
Timing: 1/7/15/30 programmable
PWM: 8/16K
Features.
Constant current 90A Max 100A <10S
Li-Poly 2-7 cells
Dynamic Braking
BEC: opto
Auto shut down when lose signal
Slow down at 3.0V per cell Lipo, Cut-off at 2.9V per cell Lipo 0.8V NiMh
User Programming options.
Battery settimg
Throttle Rnage
Brake settimg 4 options:
Direction and Cutoff Type
Timing Mode Setting: 1 / 7 / 15 / 30
PWM setting: 8K/16K

Note:
This ESC is OPTO, with no BEC supplying power to your receiver. You will need an extra power source for your receiver. (such as UBEC or Rx battery pack)
If you hear the music tone repeat for more than 3 times, you may need to check your power source to the receiver.

HobbyKing Red Brick 80A ESC - (Heli Mode)





The HobbyKing Red Brick ESCs wont win first place for style, though they will take top points for simplicity and reliability. With a basic set of programming features these ESCs are a perfect solution for anyone looking for a basic yet robust speed controller.

The Red Brick ESC has been engineered with heat dissipation in mind. featuring an over sized Aluminium heat sink for the FETS and and individual heatsink for the MCU the Red Brick ESC is slightly larger than many ESCs in its class, however this compromise in size is aimed at assisting to eliminate the problems associated with over heating.

Specs.
Max Amps: 80A
Ubec: 5v / 5A
Cells: 2~7 Lipoly
Size: 75mm x 20mm x 40mm
Weight: 76g (Inc Wires)
Heli Mode: Soft start (default)

User manual included.